Home    Domestic Series    Commercial Series    Swimming Pool Series
Company Profile    News    Projects    Technical    Service    Contact    Blog
models of domestic heat pumps

 

"Wave" dynamic-heating type domestic heat pumps (also called residential heat pumps, household heat pumps) don't need heat exchangers (refrigerant/gas coils) in water tanks. Only water pipes connect main units and tanks. This design brings higher quality hot water, more safety, installation convenience and Eco-friendship, less refrigerant leakage possibility.

You can also choose static heating type domestic heat pumps for less investments: copper pipes including refrigerant connect main units and tanks, and goes into water tanks to act as heat exchangers.

Confused by classification of domestic heat pumps? Read this.

We supply 5 models for tanks with volumes of 150L~500L in this series for various houses. To see solutions and examples, click here.

Models: DO-150 (WE-150T)/DO-200 (WE-200T)/DO-260 (WE-260T)/DO-360 (WE-360T)/DO-500 (WE-500T)
Including heat pump main units (DOMW-1, DOMW-2) and water tanks.

Wanna remain your exsiting tank of electric water heater/geyser? Read this.

 

ADVANTAGES

+ Advanced and distinctive heat exchange technology
We have our key technologies of heat exchange in main units and water tanks. That is, speaking simply, unique heat exchanger design in main units, stratified flow dynamic heat exchanging in water tanks, and advanced control syestem. Thus we realize "heating energy plus": the capacity of 150 liter WAVE domestic heat pumps is bigger than 200 liter other brand products.

+ High-quality enamel inner tank in the water tank. We guarantee exchange in five years if water tanks leak

2-3mm steel plate is combined with enamel. Throgh 1000℃ high temperature sintering, the enamel and the steel is united exactly. There's no coil in water tanks--only water pipes connect tanks and main units. The service life is much longer than ordinary water tanks.

+ Closed refrigerant system
We do not produce or agree with open refrigerant system which will sacrifice environment and product performance because of easy leaking. WAVE insist international standard of closed refrigerant system all the while.

+ 3 points real time temperature control. Know the dynamic hot water at any moment.

Users can know the hot water volume by reading the display panel.

+ Refrigerant technology

Adopt S.C.L refrigerant control technology. We use different additives for different heat pumps to make the products high efficient in various working conditions.

+ Super copper foils

New copper foil evaporator technology considers special working conditions of air-water heat pumps and promote the efficiency of evaporation.

+Anti-scaling and pressure-bearing

WAVE use noble mental coat to resist corrosion. Bear pressure of 30KG.  The technology is specially developed for air-water heat pumps. It is more advanced than steel plate and pipe-in-pipe heat exchange technology.

+ Specialized in air-water heat pumps for 15 years

With 15 years' developing history, every model of WAVE have gone through test and using. Time is experience as well as guarantee. Now our company become a leading provider of air water heat pumps and heat pump water heating engineering.

+ High configuration

Our products use high quality parts and advanced control system.

 

SPECIFICATIONS

                                                                                                    

Model DO-150 DO-200 DO-260 DO-360 DO-500
tank volume 150L 200L 260L 360L 500L
power system   220V 50Hz
rate input power 860W 950W 1020W 1110W 1500W
max input power 1200W 1380W 1420W 1510W 1800W
rate current 4.5A 4.7A 4.7A 5.0A 6.5A
rate water-out temp 55°C
max water-out temp 60°C
COP 4
ambient air temp “-10°C~40°C”
refrigerant quantity 850g 870g 870g 1010g 1300g
refrigerant R22, R417c
rater pressure of inner bladder 0.75MPa
noise ≤51dBa
max pressure 3.0MPa
max pressure of tanks 0.8MPa
max pressure of heat exchangers 3.2MPa
level of anti electric shock I
level of water proof IPX4
exhaust 2.4MPa
inspiration 0.8MPa
tank size 450x1575mm 519x1530mm 620x1280mm 620x1695mm 709x1720mm
main unit size 850x290x825mm 850x290x825mm 850x350x825mm 850x350x825mm 695x570x565mm
weight 40kg/60kg 40kg/80kg 40kg/80kg 40kg/100kg 87kg/110kg

                                                                                                    
*data based on: ambient temp 20°C, initial  water temp 10°C, terminal water temp 50°C
*Please take objects as final reference due to continuous product improvements.

Copyright @ 2009 WAVE HEAT ENERGY EQUIPMENT LIMITED. All rights reserved.

friend links: